Filter
Top Products
7. Slide the chassis into the cabinet. Install
the cabinet seal (accessory part) between
the cabinet and the frame/wall.
8. Reinstall the shipping bracket and attach
with screws (2).
9. Reconnect the green and yellow
grounding wire.
Electrical Shock Hazard
Connect ground wire when unit is in
cabinet.
Failure to do so will result in electrical
shock.
10. Remove slide-out filter from front panel.
Replace the front panel. Insert tabs into
slots on the top flange of the cabinet.
Rotate the front panel downward until it
fits snugly between cabinet side flanges.
Secure front panel with 2 round-head
screws (accessory parts). Replace slide-
out air filter.
NOTE: Make sure the Exhaust Door
Control lever is between the frame and
the first air discharge louver before
securing front panel with screws.
19