Filter
Top Products
15
Style 1—Cool only air conditioner settings
Fan Control
Set the Fan control to the desired setting. When the air
conditioner is operating at Low Cool, High Cool or Turbo Cool,
the fan circulates air continuously.
■ Turbo Cool—for maximum cooling
■ High Cool—for normal cooling
■ Low Cool—for sleeping comfort
■ Fan Only—to move air continuously without cooling
NOTE: Fan runs on Turbo speed only.
■ Power Saver (on some models)—fan runs only when cooling
is needed.
Since the fan does not circulate the room air continuously,
less energy is used, but the room air is not circulated as
often. Use Power Saver when you are asleep or away from
home.
NOTE: Fan runs on Low speed only.
Your air conditioner will have one of these fan controls
Thermostat
Turn the THERMOSTAT control to a mid-setting. Adjust the air
conditioner's performance by turning the Thermostat control
clockwise for maximum cooling. For less cooling, turn the
THERMOSTAT control counterclockwise. Experiment to find the
setting that suits you best.
Style 2—Heat/cool air conditioner settings
(on some models)
Fan Control
Set FAN control to the desired setting. When the air conditioner is
operating at Low Cool, High Cool, Turbo Cool, Low Heat or Turbo
Heat, the fan circulates air continuously.
■ Turbo Cool—for maximum cooling
■ High Cool—for normal cooling
■ Low Cool—for sleeping comfort
■ Turbo Heat—for maximum heating
■ Low Heat—for reduced heating
■ Fan Only—to move air continuously without cooling or
heating
NOTE: Fan runs on Turbo speed only.
■ Power Saver—fan runs only when cooling is needed.
Since the fan does not circulate the room air continuously,
less energy is used, but the room air is not circulated as
often. Use Power Saver when you are asleep or away from
home.
NOTE: Fan runs on Low speed only.
Thermostat
Turn the THERMOSTAT control to a mid-setting. Adjust the air
conditioner's performance by turning the Thermostat control
clockwise for maximum cooling. For less cooling, turn the
THERMOSTAT control counterclockwise. Experiment to find the
setting that suits you best.
For heating, turn the THERMOSTAT control counterclockwise.
The electric-strip heater is activated when the Fan Control is set
to a heat setting.
NOTE: Your air conditioner is not designed to be used as a
primary heat source. It is intended for supplemental heating only.