Cleaning the front panel
Explosion Hazard
Unplug power cord from outlet
before cleaning air conditioner.
Use only nonflammable cleaners.
Failure to follow these instructions
can result in death, explosion, fire,
or electrical shock.
1. Unplug the power cord.
2. Remove the front panel from the unit.
l Remove the 2 screws from the bottom
edge of the front panel.
l Lift front panel slightly and then pull it
toward you.
3. Remove the slide-out air filter from the
front panel. Clean it separately. See
“Cleaning the air filter.”
4. Clean front panel with warm water and a
mild soap or detergent. Use a soft cloth.
Rinse and dry.
5. Wipe the control panel clean with a soft,
dry cloth.
6. Replace the front panel.
l Push it straight onto the cabinet. Then
lower it slightly to lock it in place.
l Replace the 2 screws in the base of the
front panel.
7. Plug in the power cord.
19