Filter
Top Products
Electrical requirements
Electrical Shock Hazard
Plug air conditioner into grounded
three prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not fuse neutral or grounding
circuit.
Do not use air conditioner with
front panel removed.
Failure to follow these instructions
can result in death, electrical
shock, or serious injury.
Electrical ground is required on this
appliance.
DO NOT, UNDER ANY CIRCUMSTANCES,
REMOVE THE POWER SUPPLY CORD
GROUNDING PRONG.
OBSERVE ALL LOCAL CODES AND
ORDINANCES.
NOTE: If codes permit, and a separate
grounding wire is used, it is recommended
that a qualified electrician determine that the
grounding path is adequate. Use a time-
delay fuse or time-delay circuit breaker. It is
required that a separate circuit, serving only
this air conditioner, be provided. See the
chart on page 5 for electrical plug variations.
Choose the plug that matches your unit’s
plug. Then, use the chart to find the voltage
and ampere requirements for your air
conditioner, and the gauge of copper wire
required for the receptacle wiring.
Fire Hazard
Do not use an extension cord.
Doing so can result in death, fire, or
electrical shock.
Grounding method
For your personal safety, this appliance
must be grounded. This air conditioner
is equipped with a power supply cord
containing a 3-prong grounding plug. To
minimize possible shock hazard, the cord
must be plugged into a mating 3-prong
grounding-type wall receptacle, grounded
in accordance with all local codes and
ordinances. If a mating wall receptacle is
not available, it is the responsibility of the
consumer to have a proper wall receptacle
installed by a qualified electrician.