Whirlpool ACC602 Air Conditioner User Manual


 
Olllng the fan motor
Electrlcal Shock Hazard
Disconnect power cord from receptacle
before oiling motor. Fallure to do so could
result In personal InJury.
1. Oil the fan motor per instructions on the motor.
To add oil, pull out the oil hole plug at each end
of the motor (see diagram). An easy-to-use
one-ounce capsule of especially recommended
oil (Part No. 10943) can be ordered from your
Whirlpool servicing dealer, or use SAE X20
non-detergent oil.
2. Replace the plug to keep dirt from motor
bearings.
3. Reinstall the unit in cabinet after performing
maintenance. Refer to the “Installation instruc-
tions” section for your unit.
Energy saving tips
l Improve home insulation (seal doors, windows,
and close fireplace flue).
l Close blinds or drapes on sunny side of house;
add window awnings.
l Keep air filter clean. Don’t block air flow with
drapes or furniture.
l Ventilate attic (high temperature levels add to
normal cooling load).
l Try not to use heat producing appliances during
the honest part of the day. Turn lights, radios,
televisions, and other appliances off when not
needed.
l Keep heat registers and cool air returns closed
or blocked off so cooled air won’t escape.
l Use a vent fan in areas where cooking, laundry,
or bathing is done to pull out extra heat and
moisture near its source.
14