Filter
Top Products
26
Figure 35
View from top
View from side
Step 23
Install the condiment basket
You will need: condiment basket and end bracket.
Insert one wire end of the condiment basket into the hole
in the side frame. Figure 36 (a). Insert the opposite wire
end of the condiment basket into the hole in the end
bracket. Hold the end bracket at an angle so the lower tab
is inside the frame tube. Push the bracket into the frame.
Figure 36 (b). Check to see that the lower tab of the
bracket is hooked in the slot in the frame. Figure 36 (c).
To fully seat the bracket, you may have to tap it lightly
with a hammer.
ƽWARNING: If the end bracket is in any way cracked
or damaged, do
not use the condiment basket. Call
our Customer Service Center to order a new part.
Slot in frame
(view from below)
Figure 36
(c)
(b)
Wire end
(a)
Step 22
Secure side burner
Stand to the right side of the barbecue. Slightly pull back
both side burner locks. Slide the side burner toward the
control panel. The locks will snap into the slots in the
front and back of the side burner. Figure 35.
ƽCAUTION: Make sure both locks have snapped
into place.