Filter
Top Products
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts
You May Need. You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
22
Tools Needed:
Slide the nylon center bushing into the
stationary spring cone at the end of the
spring and align the stationary spring
cone(s) with the holes in the center
bearing bracket. Secure the spring(s) to
the center bearing bracket with
(2) 3/8”- 16 x 1-1/2” hex head bolts
and (2) 3/8”-16 nuts.
IMPORTANT: SPRINGS UNDER TENSION
CAN BE DANGEROUS.
IMPORTANT: THE SPRING WARNING
TAG(S) SUPPLIED MUST BE SECURELY
ATTACHED TO THE STATIONARY SPRING
CONE IN PLAIN VIEW. SHOULD A
REPLACEMENT SPRING WARNING TAG
BE REQUIRED, CONTACT WAYNE-
DALTON CORP. FOR FREE
REPLACEMENTS.
15
Nylon Center Bushing
TORSION
SPRING
(2) 3/8”-16 NUT
(2) 3/8”-16 X 1-1/2”
HEX HEAD BOLT
CENTER BEARING
BRACKET
TORSION
SPRING
TORSION
SPRING
NYLON CENTER
BUSHING
CENTER BEARING
BRACKET
STATIONARY
SPRING CONE
STATIONARY
SPRING CONE
9/16” Socket
Ratchet Wrench
9/16” Wrench