Filter
Top Products
Please Do Not Return This Product To The Store. Call Us Directly! Our Trained Technicians Will Answer Your Questions and/or Ship Any Parts
You May Need. You can reach us Toll Free at 1-888-827-3667 for Consumer Assistance or online at www.wayne-dalton.com
17
Tools Needed:
INSTALLATION
IF U-BAR IS INSTALLED
8
Power Drill
7/16” Socket
Driver
(2) Saw Horses
Operator Bracket
NOTE: If installing a trolley type operator,
complete this step. If not, skip this step
and continue with Step 9.
IMPORTANT: WHEN CONNECTING A
TROLLEY TYPE GARAGE DOOR OPENER
TO THIS DOOR, A WAYNE-DALTON
OPENER/TROLLEY BRACKET MUST
BE SECURELY ATTACHED TO THE TOP
SECTION OF THE DOOR, ALONG WITH
ANY U-BARS PROVIDED WITH THE
DOOR. THE INSTALLATION OF THE
OPENER MUST BE ACCORDING TO
MANUFACTURER’S INSTRUCTIONS AND
FORCE SETTINGS MUST BE ADJUSTED
PROPERLY.
NOTE: For retro fit applications, the
operator bracket must be aligned with
an existing operator
If no u-bar is installed:
Locate the center of the top section and
attach the operator bracket as shown in
the illustration using (6) 1/4” - 20 x 5/8”
self drilling screws.
If u-bar is installed:
Remove, but retain (4 to 6)
1/4”- 20 x 7/8” self drilling screws
from the center of the u-bar. Locate
the center of the top section and slide
operator bracket under u-bar till the
operator bracket is seated against the
u-bar flange. Attach the operator bracket
using (6) 1/4” - 20 x 5/8” self drilling
screws (as shown). Reattach the u-bar
using the self tapping screws removed
previously.
OPERATOR
BRACKET
OPERATOR
BRACKET
U-BAR
U-BAR
1/4”- 20 X 7/8” SELF
DRILLING SCREWS
SIDE VIEW OF U-BAR
U-BAR
OPERATOR BRACKET
IN PLACE UNDER
U-BAR
(6) 1/4”- 20 X 7/8”
SELF DRILLING
SCREWS
IF NO U-BAR IS INSTALLED
( 6) 1/4”-20 X 5/8”
SELF DRILLING
SCREWS
OPERATOR BRACKET
CENTERED IN THE
MIDDLE OF TOP SECTION
SIDE VIEW
OPERATOR
BRACKET
ALIGNED WITH
TOP OF SECTION