Filter
Top Products
6
Install slide lock on the second section of the door.
Secure the lock to the section with (4) 1/4-20 x 11/16”
self drilling screws. Square lock assembly with door
section and hole in vertical track. The slide lock should
be spaced approximately 1/8” from the section edge.
IMPORTANT! SLIDE LOCKS AND OPERATORS
SHOULD NOT BE ENGAGED AT THE SAME
TIME. IF AN OPERATOR IS INSTALLED ON
THE DOOR AND ENGAGED, BE SURE SLIDE
LOCKS ARE DISENGAGED.
ONLY USE SLIDE LOCKS WHEN OPERATOR IS
DISENGAGED FROM THE GARAGE DOOR.
Slide Lock Installation
FIG. 9
(2) 1/4-20 X 7/8” SELF-
DRILLING SCREWS
STRAP
BRACKET
J-STRUT
WINDLOAD
POST
1/8”
SLIDE LOCK
ALIGN WITH
HOLE IN
VERTICAL
TRACK
(4) 1/4-20 X 11/16”
SELF DRILLING
SCREWS
FIG. 12
(2) 1/4-20 X 7/8” SELF-
DRILLING SCREWS
STRAP
STRAP
BRACKET
J-STRUT
(2) 1/4-20 X 11/16” SELF-
DRILLING SCREWS
STRAP BRACKET
(WITHOUT STRAPS)
FIG. 11
J-STRUT
FIG. 10
STRAP