Vornado vornado whole room heater Fan User Manual


 
8 English
Tight Grill Spirals
Resists curious fingers.
Cool Touch Case
Safe to touch, even on high heat setting.
Automatic Safety Shut Off System
If airflow becomes blocked and overheating occurs,
power to the heating element and fan is shut off.
Tip-Over Switch Protection
If tipped more than 10 degrees in any direction, heat
and fan functions immediately shut down.
Ideal 120°F Exit Air Temperature
Warm enough to heat an entire room.
Resetting Your Vornado Heater
Your Vornado Heater has a multi-level safety shut-off system
designed to prevent overheating. Overheating may occur when
the inlets or outlet are blocked, a foreign object prevents the
blade from turning, or the appliance tips over. If this happens,
the safety shut-off system will cut power to the heat element
and you will need to manually reset the heater.
1. Set the Power switch to Off and unplug the unit.
2. Remove any obstructions.
3. Wait 5–10 minutes, allowing the unit to cool down.
4. Plug in the unit and place in desired position.
5. Set the Power switch to On. Your Vornado Heater should now
function normally.
Note: If the safety shut-off system repeatedly shuts off your
heater or if it will not reset after following the above procedure,
DO NOT ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado
Consumer Services Department toll-free at 1-800-234-0604.
Advanced Safety FeaturesHow To Use