Vornado vornado whole room heater Fan User Manual


 
5
English
use with an extension cord or relocatable power tap (outlet/power
strip). Operate this heater only in its upright position.
Do not operate this heater on an elevated surface such as a shelf or
desktop. Use only while placed on the floor.
This heater is equipped with a thermal safety shut-off system,
designed to turn off the heater when an internal overheating
condition is detected (see How To Use “RESETTING YOUR
VORNADO HEATER,” to determine how to check and reset the
heater).
Do not use this heater on a circuit that has a variable speed device
operating, such as a blender or a variable speed fan.
Do not use heater to dry human or animal hair/fur or articles of
clothing.
CAUTION: In order to avoid a hazard due to inadvertent resetting
of the thermal cutout, this appliance must not be supplied through
an external switching device, such as a timer, or connected to a
circuit that is regularly switched on and off by the utility.
Do not use this heater in an RV, a boat, or in any application where a
DC/AC converter is converting battery power to AC power.
Do not use the heater on any Ground-Fault Circuit Interrupted
(GFCI) circuit. A GFCI circuit has a reset button in the middle of the
outlet.
Do not use this heater on a surge protected circuit.
Do not use the heater with any kind of timer to turn the unit on or
off.
Do not use this heater on a circuit that is shared with a high power
device, such as a vacuum or a circular saw.
CAUTION: A loose fit between the outlet (receptacle) and plug
may cause overheating and distortion of the plug. Discontinue use
of the product. Contact a qualified electrician to replace loose or
worn outlet.
SAVE THESE INSTRUCTIONS
IMPORTANT INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS HEATER.