Filter
Top Products
7
English
Getting Started
Using your Vornado Heater is easy. Just follow these simple steps.
1. Position your heater so the vortex beam of warm air is directed
across the room, unobstructed. Position it in a location that
is representative of the room temperature. Avoid areas of
temperature extremes such as cold drafts and heat registers. Please
refer to IMPORTANT INSTRUCTIONS at the beginning of this
owner’s guide.
2. Plug power cord into a standard wall outlet.
3. Press the Power switch to On.
4. Turn the Thermostat knob to the desired setting.
How To Use
1
2
3
4
Thermostat
Allows you to select your
desired comfort level.
Fan
In the Auto position, the fan
will cycle on and off with
the heating element. In the
High position, the fan will run
continuously.
Heat
1500 watts on High and 750
watts on Low.
Power On/Off
Front light illuminates when
power is on.
Controls
1
2
3
4