Vornado TAVH10 Electric Heater User Manual


 
14 English
During the off-season or after extended periods of non-use, you may
choose to store your heater. To ensure long life of the product, it is
recommended to store your heater by following these instructions:
1. Unplug power cord and wrap
around the Cord Storage on
bottom of heater.
2. Cover, or place back in retail
carton if available. This will
prevent the heater from accu-
mulating dust overtime.
3. Store heater in a cool and dry
location.
RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multi-level safety shut off system designed
to prevent overheating. Overheating may occur when the inlets or
outlet are blocked. If this happens, the safety shut off system will cut
power to the heater and you will need to manually reset the heater.
1. Power heater off, then unplug the power cord.
2. Remove any obstructions.
3. Wait 5–10 minutes, allowing the heater to cool down.
4. Plug in the power cord and place heater in desired position.
5. Touch the power button on. Your Vornado Heater should now func-
tion normally and return to the last stored setting.
Note: If the safety shut off system
repeatedly shuts off your heater or if it
will not reset after following the above
procedure, call Vornado Consumer
Services Department toll-free at
1-800-234-0604.
STORAGE RESET HEATER
Cleaning is recommended before storage.
DISPOSAL
Dispose of all packaging materials in an environmentally respon-
sible manner. Battery disposal - please always dispose of batter-
ies at a suitable recycling location.