Filter
Top Products
12 English
1. Open the battery door located on the
back side of the remote, and insert the
battery with the “+” facing up. Close the
battery door. It is now ready for use.
For battery replacement the remote
requires one coin style battery (CR2025).
2. The remote control functions the same
as the heater controls.
Touch the power button ( ) to turn on
the heater. Touch ( ) to select a Mode
and use (-) or (+) to select a temperature.
Touch the ( ) button to go into timer
mode. Touch the ( ) button to choose
hours of operation.
The remote needs to be within the line
of sight with the lens on the heater
during use.
REMOTE CONTROL
The TAVH10 Remote is wrapped inside a polybag. A separate polybag with a coin style battery is also included (battery is not installed in the
remote). The polybags are packed inside the top section of molded pulp that is placed securely around the top and bottom of the heater.
CAUTION: DO NOT INGEST BATTERIES.
POWER ON/OFF ( )
THERMOSTAT (-/+)
MODE
High Heat (1500 watts),
Low Heat (750 watts) or
Fan Only.
TIMER ( )