Filter
Top Products
English
7
ADVANCED SAFETY FEATURES
OPERATING TIPS
To properly carry the heater, place one hand on the
back opening and use your other hand to hold from
the front (see picture).
In smaller areas, you might prefer to set the unit in
LOW mode. A vortex beam of air will gently keep the
air circulating in the room for even, uniform heating.
In larger spaces, you might prefer to set the unit in HIGH mode. A
vortex beam of air will gently keep the air circulating in the room for
even, uniform heating.
To use the TVH 500 as a personal fan, set the mode to FAN position.
The TVH 500, like any other 1500-watt electric heater, draws up
to 12.5 amps of electric current. If using your TVH 500 on HIGH
setting causes your home circuit breaker or fuse to trip, we offer the
following suggestions:
Try turning off other electrical appliances that run on the same circuit
as your heater.
Run your heater in LOW mode.
Have your electrician add an additional circuit to your home’s
electrical system.
When the room temperature is higher than the set temperature it is
normal and correct to have little to no heat coming out of the TVH500.
When the unit is first turned on there is a slight delay before heat will
start to be produced.
ALWAYS USE COMMON SENSE WHEN USING THIS AND/OR
ANY ELECTRICAL APPLIANCE.
TIGHT GRILL SPIRALS
Resists curious fingers.
COOL TOUCH CASE
Safe to touch, even on high heat setting.
AUTOMATIC SAFETY SHUT OFF SYSTEM
If airflow becomes blocked, power to the heating
element is shut off to prevent overheating.
TIP-OVER PROTECTION
If tipped over, power to the heating element and fan
motor is reduced to prevent overheating.
IDEAL 120°F EXIT AIR TEMPERATURE
Warm enough to heat an entire room.
GROUNDED HEAVY-DUTY POWER CORD
Adds durability and a more secure wall connection.