Filter
Top Products
English
5
HOW TO USE
Using your Vornado Heater is easy. Just follow these simple steps.
Position your heater so the vortex beam of warm air is directed
across the room unobstructed. Position it in a location that
is representative of the room temperature. Avoid areas of
temperature extremes such as cold drafts and heat registers.
Please refer to IMPORTANT INSTRUCTIONS at the beginning of
this owner’s guide.
Plug into a standard grounded wall outlet.
Press the POWER button.
Select the mode you wish to use (Low, High or Fan Only.)
Set thermostat to desired temperature using the up and
down arrows.
CARE & MAINTENANCE
Your heater has no user serviceable parts. Do not disassemble the
unit – it will void your warranty. If service is required, return your
heater to Vornado (see Warranty section).
The motor is permanently lubricated and requires no oiling.
Because your heater moves a substantial amount of air, it will require
regular cleaning. Be sure to unplug the unit prior to any
cleaning activity.
Use a vacuum cleaner with the brush attachment to clean any
accumulated dust on the front grill and the side air inlets.
During the off-season or extended periods of non-use, store your
heater. Unplug the unit and bundle the cord. Save the plastic bag
the heater was shipped in so you can cover the unit and minimize
settling dust.
1.
2.
3.
4.
5.
This product is equipped with a 3-prong plug, with a grounding pin as a
safety feature. To reduce the risk of electric shock, this plug is intended
to connect to properly grounded outlets only. This plug will fit into a
grounded outlet only one way. Do not alter the plug. Do not attempt to
defeat this safety purpose of the grounding plug.
This product must be grounded. If the product malfunctions, grounding
provides a path of least resistance for the electric current to reduce the risk
of electric shock. The 3-prong plug must be inserted into a grounded outlet
that has been properly installed in accordance with all electric codes and
ordinances. If you are in doubt as to whether or not an outlet is properly
grounded, contact a qualified electrician.
This heater is for use on 120 volts. The cord has a plug as shown at A in
Figure 65.1. An adapter as shown at C is available for connecting three-
blade grounding-type plugs to two-slot receptacles. The green grounding
lug extending from the adapter must be connected to a permanent ground
such as a properly grounded outlet box. The adapter should not be used if
a three slot grounded receptacle is available.
SAVE THESE INSTRUCTIONS
Figure 65.1