Filter
Top Products
English6
TVH500 OPERATING CONTROLS
1.
2.
3.
4.
5.
5
1
2
3
4
1
2
3
4
5
RESETTING YOUR VORNADO HEATER
Your Vornado Heater has a multi-level safety shut-off system designed
to prevent overheating. Overheating may occur when the inlets or
outlet are blocked, a foreign object prevents the blade from turning,
or the appliance tips over. If this happens, the safety shut-off system
will cut power to the heat element and you will need to manually reset
the heater.
Set the POWER switch to OFF and unplug the unit.
Remove any obstructions.
Wait 5–10 minutes, allowing the unit to cool down.
Plug in the unit and place in desired position.
Set the POWER switch to ON. Your Vornado Heater should now
function normally.
If the safety shut-off system repeatedly shuts off your heater or if it
will not reset after following the above procedure, DO NOT
ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer
Services Department toll-free at 1-800-234-0604.
POWER ON/OFF
Front light illuminates when
power is on.
MODE
HIGH HEAT 1500 watts,
LOW HEAT 750 watts, or
FAN ONLY.
TEMPERATURE
Allows you to select your
desired comfort level. Use
the UP arrow to raise the
set temperature. Use the
DOWN arrow to lower the
set temperature.
TIMER
The timer can be set in hour intervals up to 9 hours.
Press the TIMER button to go into timer mode. In
timer mode, use the UP arrow to add hours. In timer
mode, use the DOWN arrow to remove hours.
REMOTE
The remote control functions the same as the unit
controls. The remote requires 2 AAA batteries. To
replace the batteries remove the cover located on the
bottom side of the remote.
SOUND
When a setting is changed you will hear a “beep” from
the unit.
LCD DISPLAY
Dims for no-glow night operation.