Filter
Top Products
Thermostat User Guide
27
Maint Service
The Maintenance Service screen will show the accumulated Heat and Cool Runtime hours as well as the Service Interval
that will be used to trigger a Maintenance Message. Any HEAT or COOL type of HVAC operation will cause the respective
Runtime values to increase.
When the combined HEAT and COOL Runtime hours equals the Service Interval hours, the Red LED will flash along with
a “Maint” message to remind you your HVAC system may require periodic maintenance. Pressing the Menu button will
take you to the Filter Service screen. The Reset button can be pressed and the HEAT and COOL Runtime values will be
reset to zero.
The Service Interval period can be changed using the +/- buttons.
Maintenance Service Screen
Maintenance Service
Don
e
Reset
+
Heat Runtime
Service Interval
0 HRS
3000 HRS
Cool Runtime
0 HRS
Runtim
e
Screen navigation buttons:
Done
Reset
+
Return to Main Menu Screen
Increase the Service Interval by 1
hour
Decrease the Service Interval by 1
hour