Vivotek IP8352 Home Security System User Manual


 
VIVOTEK
User's Manual - 47
■ Disconnect: If you want to break off the current connections, please select them and click this
button Please note that those checked connections will only be disconnected temporarily and will
automatically try to re-link again (IE Explorer or Quick Time Player)�
Enable access list ltering: Check this item and click Save if you want to enable the access list ltering
function�
Filter
Filter type: Select Allow or Deny as the lter type. If you choose Allow Type, only those clients whose
IP addresses are on the Access List below can access the Network Camera, and the others cannot
access� On the contrary, if you choose Deny Type, those clients whose IP addresses are on the Access
List below will not be allowed to access the Network Camera, and the others can access�
Then you can Add a rule to the following Access List Please note that the IPv6 access list column
will not be displayed unless you enable IPv6 on the Network page For more information about IPv6
Settings, please refer to Network > Enable IPv6 on page 55 for detailed information�
There are three types of rules:
Single: This rule allows the user to add an IP address to the Allowed/Denied list�
For example: