Filter
Top Products
VIVOTEK
User's Manual - 61
If you want to congure another sensor setting for day/night/schedule mode, please click Prole to open
the Sensor Settings Prole Settings page as shown below.
Please follow the steps beolw to setup a prole:
1� Check Enable this prole�
2� Select the applied mode: Day mode, Night mode, or schedule mode� Please manually enter a range of
time if you choose Schedule mode�
3� Configure Exposure settings in the second column� Please refer to the last page for detailed
information�
4� Click Save to enable the setting and click Close to exit the page�
2010/10/30 13:44:17