Filter
Top Products
VIVOTEK
48 - User's Manual
URL command -- http://<ip address>:<http port>/<access name for stream 1 ~ 5>
For example, when the Access name for stream 2 is set to video2�mjpg:
1� Launch Mozilla Firefox or Netscape�
2� Type the above URL command in the address bar� Press Enter�
3. The JPEG images will be displayed in your web browser.
NOTE
► Microsoft
®
Internet Explorer does not support server push technology; therefore, using http://<ip
address>:<http port>/<access name for stream 1 ~ 5> will fail to access the Network Camera�
► Users can only use URL commands to request the stream 5. For more information about URL
commands, please refer to page 105�
HTTPS
By default, the HTTPS port is set to 443� It can also be assigned to another port number between 1025
and 65535�
FTP
The FTP server allows the user to save recorded video clips� You can utilize VIVOTEK's Installation
Wizard 2 to upgrade the rmware via FTP server. By default, the FTP port is set to 21. It also can be
assigned to another port number between 1025 and 65535�
http://192.168.5.151/video2.mjpg