Filter
Top Products
VIVOTEK
60 - User's Manual
Sensor Settings
Advanced Mode
Click Sensor Settings to open the Sensor Settings page� On this page, you can set the maximum
exposure time, exposure level, and AGC (Auto Gain Control) settings�
You can congure two sets of sensor settings: one for normal situations, the other for special situations,
such as day/night/schedule mode�
Exposure
■ Maximum Exposure Time: Select a proper maximum exposure time according to the light source of
the surroundings� The exposure times are selectable for the following durations: 1/480 second, 1/240
second, 1/120 second, 1/60 second, 1/30 second, 1/15 second, and 1/5 second� Shorter exposure
times result in less light�
■ Exposure level: You can manually set the Exposure level, which ranges from 1 to 8 (dark to bright)�The
default value is 4�
■ Max gain (Auto Gain Control): You can manually set the AGC level (2X 4X, or 8X). The default value is
4X.
■ Enable BLC (Back Light Compensation): Enable this option when the object is too dark or too bright
to recognize� It allows the camera to adjust to the best light conditions in any environment and
automatically give the necessary light compensation�
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes� When completed with the settings on this page, click Save to enable the
settings and click Close to exit the page�
2010/10/30 13:44:17
Sensor Setting 2:
For special situations
Sensor Setting 1:
For normal situations