Filter
Top Products
21
6. CleanWave
®
Sanitizing Bagless Vacuum Operation — continued
Carpet Mode
Select Carpet Mode for conventional vacuuming with a Powered Brush Roll and Powerful Suction. Use this setting when you
wish to operate the power brush without the sanitizing light. The Mode Indicator will illuminate as RED.
Sanitize Mode
Select the Sanitize Mode when you want to sanitize and vacuum your carpets and floors with Sanitizing Light and Powerful
Suction. The Sanitizing Light Bulb will turn on when the Floor Sensors detect a surface. When the Sanitizing Light Bulb is on, the
Mode Indicator will illuminate as BLUE. Use this setting when you wish to operate the sanitizing light without the roller brush. The
Sanitizing Light Bulb will turn off when the Floor Sensors do not detect a surface, such as when the Sanitizing Power Head is lifted
off the floor. When this occurs, the Mode Indicator will not be illuminated (turns off).
Both Mode (Carpet and Sanitize Modes Simultaneously)
Select the Both Mode when you want to combine Sanitizing Light with a Powered Brush Roll and Powerful Suction. When the
Sanitizing Light Bulb is on, the Mode Indicator will illuminate as PURPLE. The Sanitizing Light Bulb will turn off when the Floor
Sensors do not detect a surface. When this occurs, the Mode Indicator will not be illuminated (turns off).
Surface Protection
When the Sanitizing Power Head is held or left stationary on a surface (i.e., not moving) for more than 5 seconds, the Sanitizing
Light Bulb will automatically turn off. When this occurs, the Mode Indicator will blink slowly (blink BLUE if in Sanitize Mode; blink
PURPLE if in Both Mode). Once movement is re-initiated, the Sanitizing Light Bulb will turn back on and the Mode Indicator
blinking will stop. This happens automatically and is one of the features designed into your canister vacuum to protect your
surfaces.
Deep Pile (Shag) Carpet Operation
For best performance when sanitizing shag-type carpets, move the Sanitizing Power Head back-and-forth at a slightly faster pace
than your normal vacuuming stroke. If the speed on shag-type carpet is too slow, the vacuum will enter the Surface Protection
mode and the Mode Indicator will slowly blink BLUE or PURPLE. The blinking will stop once sufficient speed is achieved.