Filter
Top Products
13
GENERAL
MAINTENANCE
CHANGING THE LIGHT BULB
1.
Make sure vacuum has been
switched off and unplugged
before changing light bulb.Also,
allow the light bulb to cool.
Remove the two screws and
remove the light cover.
Remove the burned out light
bulb and pull it from the socket.
Insert the new bulb.
2.
3.
Attach the light cover using
both screws.
4.
WARNING:TO REDUCE THE RISK OF ELECTRIC SHOCK,UNPLUG CLEANER BEFORE REMOVING OR REPLACING LIGHTBULB.
NOTE: This cleaner uses a common automotive lamp #906,13.0 volts.For bulb replacement call 1-877-VAX-USA-9 (1-877-829-8729) or visit our
website at www.vaxusa.com to locate a dealer nearest you.