Filter
Top Products
11
DIRT CONTAINER
AND FILTER
CLEANING YOUR LIFETIME HEPA FILTER (CONTINUED)
REPLACE FOAM FILTER
3.
Twist filter handle to the left and
pull out of lid.
4.
Hold filter under running water to wash.
Ring excess water out of filter. Allow
filter to dry for at least 24 hours.
5.
Place filter under water to clean.Make
sure filter is completely dry before
returning to cleaner.
2.
Return filter to the dirt container
lid.
REPLACE PLEATED FILTER
1.
Replace filter inside filter cup by
aligning with tabs inside of filter
cup.Twist to the right until filter
locks in place.
Place filter lid on top of dirt container and
align arrows (Diagram 3).Push down gently
and twist filter cup to the right until lid is
secure and snaps in place (Diagram 3a).
3.
3a.
NOTE: Let filter dry for at
least 24 hours before placing
back in cleaner.
VAX Tip:
For your convenience while
your lifetime HEPA filter is
drying,pick up an additional
filter at a retailer near you or
online at www.vaxusa.com.