Filter
Top Products
BRICK INSTALLATIONBRICK INSTALLATION
BRICK INSTALLATIONBRICK INSTALLATION
BRICK INSTALLATION
(PRE-INSTALLED AT FACTORY)(PRE-INSTALLED AT FACTORY)
(PRE-INSTALLED AT FACTORY)(PRE-INSTALLED AT FACTORY)
(PRE-INSTALLED AT FACTORY)
NOTE: Prior to operation, be sure to remove brick
retaining strips.
MODEL 1600 - (6) BRICKS ON EACH SIDEMODEL 1600 - (6) BRICKS ON EACH SIDE
MODEL 1600 - (6) BRICKS ON EACH SIDEMODEL 1600 - (6) BRICKS ON EACH SIDE
MODEL 1600 - (6) BRICKS ON EACH SIDE
FIREBOX LEFT SIDE
MODEL 1800 - (8) BRICKS ON EACH SIDEMODEL 1800 - (8) BRICKS ON EACH SIDE
MODEL 1800 - (8) BRICKS ON EACH SIDEMODEL 1800 - (8) BRICKS ON EACH SIDE
MODEL 1800 - (8) BRICKS ON EACH SIDE
BRICK RETAINING STRIP
FIREBOX LEFT SIDE
BRICK RETAINING STRIP
SLIDE 4th BRICK BACK
BEFORE INSTALLING 5th
AND 6th BRICK
FIREBOX:
The firebrick must be inserted on each side resting on the
grate frame. First, place cut brick in each back corner. Place
remaining brick in place.
SMOKE CHAMBER:
1.Place #1 firebrick in the back of smoke chamber.
2.Slide baffle plate into smoke chamber, flat side down.
3.Place remaining firebrick in smoke chamber as
numbered below. (in placing the firebrick in the smoke
chamber, lift the left side of firebrick first and drop into
place.) See Illustrations below.
REAR OF
FIREBOX
TOP
22
22
2
11
11
1
33
33
3
55
55
5
44
44
4
66
66
6
1/2 BRICK
MODEL 1600
(4
1
/
2
) BRICKS
MODEL 1800
(6) FULL BRICKS
77
77
7
11
11
1
33
33
3
44
44
4
55
55
5
66
66
6
22
22
2
8