Filter
Top Products
Limited Warranty
Digital Security Controls Ltd. warrants that for a period of twelve months from the date of purchase, the
product shall be free of defects in material and workmanship under normal use and that in fulfilment of
any breach of such warranty, Digital Security Controls Ltd. shall, at its option, repair or replace the
defective equipment upon return of the equipment to its repair depot. This warranty applies only to
defects in parts and workmanship and not to damage incurred in shipping or handling, or damage due to
causes beyond control of Digital Security Controls Ltd. such as lightning, excessive voltage, mechanical
shock, water damage, or damage arising out of abuse, alteration or improper application of the
equipment.
The foregoing warranty shall apply only to the original buyer, and is and shall be in lieu of any and all
other warranties, whether express or implied and of all other obligations or liabilities on the part of Digital
Security Controls Ltd. This warranty contains the entire warranty. Digital Security Controls Ltd. neither
assumes, nor authorizes any other person purporting to act on its behalf to modify or to change this
warranty, nor to assume for it any other warranty or liability concerning this product.
In no event shall Digital Security Controls Ltd. be liable for any direct , indirect or consequential damages,
loss of anticipated profits, loss of time or any other losses incurred by the buyer in connection with the
purchase, installation or operation or failure of this product.
WARNING
Digital Security Controls Ltd. recommends that the entire system be completely tested on
a regular basis. However, despite frequent testing, and due to but not limited to, criminal
tampering or electrical disruption, it is possible for this product to fail to perform as
expected.
FCC COMPLIANCE
CAUTION: CAUTION:
CAUTION: CAUTION:
CAUTION: Changes or modifications not expressly approved by Digital Security Controls Ltd. could void your authority to use this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Re-orient the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
The user may find the following booklet prepared by the FCC useful: “How to Identify and Resolve Radio/Television Interference Problems”. This
booklet is available from the U.S. Government Printing Office, Washington D.C. 20402, Stock # 004-000-00345-4
IMPORTANT INFORMATION
This equipment complies with Part 68 of the FCC Rules. On the side of this equipment is a label that contains, among other information, the FCC
registration number of this equipment.
Notification to Telephone Company
Upon request, the customer shall notify the telephone company of the particular line to which the connection will be made, and provide the FCC
registration number and the ringer equivalence of the protective circuit.
PC1150PC1150
PC1150PC1150
PC1150
FCC Registration Number:FCC Registration Number:
FCC Registration Number:FCC Registration Number:
FCC Registration Number: F53CAN-73151-AL-E
Ringer Equivalence Number:Ringer Equivalence Number:
Ringer Equivalence Number:Ringer Equivalence Number:
Ringer Equivalence Number: 0.1B
USOC Jack: USOC Jack:
USOC Jack: USOC Jack:
USOC Jack: RJ-31X
Telephone Connection Requirements
Except for the telephone company provided ringers, all connections to the telephone network shall be made through standard plugs and
telephone company provided jacks, or equivalent, in such a manner as to allow for easy, immediate disconnection of the terminal equipment.
Standard jacks shall be so arranged that, if the plug connected thereto is withdrawn, no interference to the operation of the equipment at the
customer’s premises which remains connected to the telephone network shall occur by reason of such withdrawal. Ensure that plugs and jacks
meet the dimension, tolerance and metallic plating requirements of 47 C.F.R. Part 68 Subpart F.
Incidence of Harm
Should terminal equipment or protective circuitry cause harm to the telephone network, the telephone company shall, where practicable, notify
the customer that temporary disconnection of service may be required; however, where prior notice is not practicable, the telephone company
may temporarily discontinue service if such action is deemed reasonable in the circumstances. In the case of such temporary discontinuance,
the telephone company shall promptly notify the customer and will be given the opportunity to correct the situation.
Additional Telephone Company Information
The security control panel must be properly connected to the telephone line with a USOC RJ-31X telephone jack.
The FCC prohibits customer-provided terminal equipment be connected to party lines or to be used in conjunction with coin telephone service.
Inter-connect rules may vary from state to state.
Changes in Telephone Company Equipment of Facilities
The telephone company may make changes in its communications facilities, equipment, operations or procedures, where such actions are
reasonably required and proper in its business. Should any such changes render the customer’s terminal equipment incompatible with the
telephone company facilities the customer shall be given adequate notice to the effect modifications to maintain uninterrupted service.
Ringer Equivalence Number (REN)
The REN is useful to determine the quantity of devices that you may connect to your telephone line and still have all of those devices ring when
your telephone number is called. In most, but not all areas, the sum of the RENs of all devices connected to one line should not exceed five (5.0).
To be certain of the number of devices that you may connect to your line, you may want to contact your local telephone company.
Equipment Maintenance Facility
If you experience trouble with this telephone equipment, please contact the facility indicated below for information on obtaining service or repairs.
Do not return equipment to this address without prior authorization. The telephone company may ask that you disconnect this equipment from
the network until the problem has been corrected or until you are sure that the equipment is not malfunctioning.
Digital Security Controls Ltd.
160 Washburn Street
Lockport, NY 14094