Filter
Top Products
12
To Empty Bag
1. a. Unhook bag straps from the lower handle.
b. Unsnap bag clip from the top of lower handle. See
Figure 10.
c. Grasp bag handle with one hand and pull lock rod
on mounting bracket with other hand toward engine
to release.
d. Lift bag off back of unit.
2. Twist the two buttons on the back of the bag to unlock
and empty contents. See Figure 11. Hold bag handle
and bag clip while emptying the contents.
3. Compress bag opening and fold inner flap over
opening.
4. Fold outer flap over inner flap and insert buttons on
the bag through metal outlets. See Figure 11.
5. Twist the buttons to lock bag. Place bag back onto unit
as instructed on page 8.
To Remove Blower Chute
1. Grasp blower chute with one hand and pull lock rod
on mounting bracket with other hand toward engine to
release. Refer to Figure 8 on page 9.
2. Remove blower chute from rim of the discharge
opening.
Using The Nozzle Vacuum
1. Place nozzle/hose vac lever in the top position on the
nozzle to vacuum through nozzle. See Figure 12.
2. The spring loaded pin must be in the first hole (closest
to the end of the tube) of the hose adapter to operate
the nozzle vac.
3. Place both hands on top of the upper handle and fully
lift the drive control against the upper handle to propel
the unit over yard.
4. Use the speed control to choose either the high or low
speed. The speed control may be moved either while
the unit is propelling or before engaging the wheels.
IMPORTANT: Move the speed control only when the
engine is running. Changing the speed control setting
with the engine off can damage the yard vacuum.
Figure 10
Figure 11
4
Operating
Your Yard
Vacuum
IMPORTANT
Move the speed
control only when the
engine is running.
Changing the speed
control setting with the
engine off can damage
the yard vacuum.
Figure 12