Filter
Top Products
7
| OPERATING INSTRUCTIONS - Using Your Ultrasonic
Humidifier and Night Lamp |
9. Turn the water tank upright and check the water tank cap for leaks. If any water drips from the
water tank cap, remove the water tank cap and re-tighten.
10. Replace the water tank on the base by aligning the positioning points in the center to meet one
another.
11. Wipe the Water Tank with a dry cloth to remove excess water drops.
B. Operating Simultaneously - Humio can be used simultaneously as a humidifier and
night lamp.
How to turn on/off the humidifier and the night lamp at the same time:
1. Do not operate humidifier without water in the Water Tank.
2. Locate the ON/OFF Humidifier Button on Humio. It can be identified by locating the on/off/mist
symbol. [photo of the symbol]
3. Push the ON/OFF Humidifier Button once to set Humio at high humidity function and begin night
lamp color sequence.
4. Push the ON/OFF Humidifier Button one more time to set Humio at low humidity without interrupt-
ing night lamp color sequence.
5. Hold the ON/OFF Humidifier Button for two seconds to turn the entire unit off completely.
C. Operating as a Humidifier Only
How to turn on the humidifier without using the night lamp function:
1. Do not operate humidifier without water in the Water Tank.
2. Locate the ON/OFF Humidifier Button on Humio. [photo of the light bulb symbol]
3. Push the ON/OFF Humidifier Button once to set Humio at high humidity function and begin night
lamp color sequence.
4. Hold the ON/OFF Night Lamp Button for two seconds to turn off the night lamp.
D. Operating as a Night Lamp Only
How to turn on/off the night lamp without turning on the humidifier function:
1. Locate the ON/OFF Night Lamp Button. [photo of light bulb symbol]
2. Push the ON/OFF Night Lamp Button once to begin the night lamp color sequence. LED light will
rotate between shades of red, green, and blue.
3. Hold the ON/OFF Night Lamp Button for two seconds to turn off the night lamp.
How to set the night lamp to one color:
1. Locate the ON/OFF Night Lamp Button. [photo of light bulb symbol]
2. Push the ON/OFF Night Lamp Button once to begin the night lamp color sequence.
3. Allow the LED lights to rotate between shades of red, green, and blue.
4. Choose your favorite shade of color.