Filter
Top Products
VII. MICROPROCESSOR CONTROL (cont’d)
-12-
VII. k-SETTING THE DATE:
The date must be set in order for the data storage memory to correctly log events. Follow the instructions to enter the
customer access code on page 8. When the control displays Thermostat Set Point High, press the down
arrow key until the control display reads Date. Press the set button . The display will
show (year). The right two numbers will be ashing. Press the arrow keys to set the year.
When the correct year is displayed, press the set button . The display will show (month). The right
two numbers will be ashing. Use the arrow keys to set the month. When the correct month is dis-
played, press the set button . The display will show (day). The right two numbers will be ashing.
Press the arrow keys to set the day. When the correct day is displayed, press the set button .
The display will then read Date. You can use the up or down arrow keys to scroll to the
next parameter, press the alarm cancel button to exit .
VII. l-SETTING DAYLIGHT SAVINGS TIME:
This parameter is preset at the factory to automatically adjust the 24-hour clock for Daylight Savings Time. Follow the
instructions to enter the customer access code on page 8. When the control displays Thermostat Set Point
High, press the down arrow key until the display reads Daylight Savings Time. Press the set
button . The display will show Daylight Savings Time (Yes, automatically adjust for Daylight Savings
Time). For “YES” press the set button ,for “NO” press the up or down arrow key . The
display will read Daylight Savings Time (no). Press the set button . The display will read
Daylight Savings Time. You can press the up or down arrow keys to scroll to the next parameter or
press the alarm cancel button to exit .
SET
SET
SET
SET
)
)
)
SET
SET
SET
)
)
)