Filter
Top Products
4
PKGP-PRC004-EN
Features and
Benefits
Unit Cabinet
The compact cabinet with rounded
corners takes up less room and is less
costly to ship. The beveled and ribbed
top is not only aesthetically pleasing, it is
designed to prevent water from pooling
Single Point Power
A single electrical connection powers the
unit.
Unit Base
For added water integrity, Precedent has
a raised 29 mm 1(
1
/
8
") lip around the
unit’s downflow supply and return to
prevent water from blowing into the
ductwork.
Sloped Drain Pans
Every Precedent unit has a non-
corrossive, removable, double-sloped
drain pan that’s easy to clean and
reversible to allow installation of drain
trap on either side of the unit.
Through the Base Condensate
Every unit includes provisions for
through the base condensate drain
connections. This allows the drain to be
connected through the roof curb instead
of a roof penetration.
Foil-Faced Insulation
All panels in the Evaporator section of
the unit have cleanable foil-faced
insulation. All edges are either captured
or sealed to ensure no fibers get into the
airstream.
Easy-Adjust Idler Arm
With the Easy-Adjust Idler Arm, the belt
and sheaves can be quickly adjusted
without moving the mounted fan motor.
The result is a major savings in time and
money.
Patented Condenser Coil
Precedent boasts a patented 1+1+1
Hybrid coil, permanently gapped for
easy cleaning.
Colored And Numbered Wiring
You save time and money tracing wires
and diagnosing the unit.
Convertible Units
• The units ship in a downflow
configuration. They can be easily
converted to horizontal by simply
moving two panels.
• Units come complete with horizontal
duct flanges so the contractor doesn’t
have to field fabricate them. These duct
flanges are a time and cost saver.
Compressors
Precedent
™
contains the best compressor
technology available to achieve the
highest possible performance. Our
compressor line includes Trane-built
Climatuff
™
reciprocating and scrolls.
Easy Access Panels
Easy access panels reduce the number of
possible water entry points. Remove two
screws for access to the standardized
internal components and wiring.
Low Ambient Cooling
All Precedent units have cooling
capabilities down to -18°C (0°F) as
standard.