Filter
Top Products
12 of 12
*GREEN / ENERGY SAVE MODE
This feature functions as follows:
When the user enters the “Green / Energy Save” mode:
1) The thermostat switches to a second “energy saving” set point.
2) g! puts the thermostat into “Permanent Hold” mode.
When the user returns to “Normal” mode:
1) The thermostat goes back to the normal set point.
2) g! puts the thermostat into “Run Program” mode.
The thermostat is in “Green / Energy Save” mode and user changes operating mode
(heat / cool / off) on a g! UI:
1) Thermostat is put back into “Normal” mode, and begins using the normal set point.
2) g! puts the thermostat into “Run Program” mode.
The thermostat is in “Green / Energy Save” mode and user changes operating mode on the
thermostat:
1) Thermostat puts itself back into “Normal” mode, and begins using the normal set point.
2) g! puts the thermostat into “Run Program” mode.
(Wayne Dalton only)
The thermostat is in “Green / Energy Save” mode and user changes set point on a g! UI:
1) Thermostat stays in “Save Energy” mode.
2) The set point changes as desired.
3) g! stays in “Permanent Hold” mode.
The thermostat is in “Green / Energy Save” mode and user changes set point on the thermostat:
1) Thermostat stays in “Save Energy” mode.
2) The set point changes as desired.
3) g! stays in “Permanent Hold” mode.