Trane TZEMT400BB32MAA Thermostat User Manual


 
ELAN Home Systems 1690 Corporate Circle Petaluma, CA 94954 USA
tech support: 800.622.3526 • main: 760.710.0990 • sales: 877.289.3526 • email: elan@elanhomesystems.com
©2013 ELAN Home Systems. All rights reserved. ELAN and g! are trademarks of ELAN Home Systems. All other trademarks are the property of their respective owners.
Integration Note
Manufacturer: Trane
Model Number(s):
TZEMT400BB32MAA Thermostats / Leviton
VRC0P-1LW (+3) RS-232 Adapter
Minimum Core Module Version:: 5.8
Document Revision Date: 2/18/2013
OVERVIEW AND SUPPORTED FEATURES
The Trane TZEMT400BB32MAA thermostats are wireless Z-Wave thermostats capable of controlling
single and multi-staged forced air gas, oil, electric, and heat pump and air conditioning systems. The
TZEMT400BB32MAA thermostats are remote controllable over Z-Wave 900mhz wireless mesh networks
via the use of a Z-Wave RS-232 adapter, enabling 2-way control and feedback from g!. The g! system
supports up to 16 wireless thermostats.
Note: Z-Wave RF operates at 900MHz. Any other devices operating on the same frequency may cause
interference and need to be removed. Leviton recommends the system in installations of 7500 square
feet or less and installing devices typically no more than 30 feet apart. Please refer to the Leviton Vizia
RF Systems Guide (www.ViziaRF.com) for other installation considerations and details on proper setup
of the Z-Wave networks. Additional information can be found at www.z-wave.com.
THE TZEMT400BB32MAA DRIVER SUPPORTS THE FOLLOWING FEATURES:
Auto Discovery: Thermostats may be auto-detected and added into g!
History View: The history view shows the inside temperature, outside temperature, unit run times, and
cooling and heating setpoints.
Mode Control: The climate system can be set to run in the following heating and cooling modes: Heat
only, Cool only, Auto, Off or EHeat (Heat Pump Only). Fan Modes: On, Auto, Circulate
Note: Circulate must be enabled on the thermostat.
Remote Sensors: The TZEMT400BB32MAA thermostat driver supports remote sensors in the Internal
Sensor mode only.
Schedule Control: Scheduling is supported from the Viewer. The TZEMT400BB32MAA Built-in
Schedule must be disabled to use g! scheduling.
Shared Z-Wave Network: A single Leviton Vizia RF Z-Wave network may contain Door Locks,
Thermostats, and Lights. All three may be controlled over a single RS-232 Z-Wave adapter. See the
appropriate Z-Wave Door Lock and Z-Wave Lighting Integration Notes for details.
Temperature Control: Temperature control can be managed by schedules tied to house modes or by
manual control based on time (Timed Temporary Hold, Temporary Hold and Permanent Hold).
T
HE TZEMT400BB32MAA DRIVER DOES NOT SUPPORT THE FOLLOWING FEATURES:
Any feature not specifically noted as “supported” is not supported.
Name Detection: All thermostats will populate during auto-discovery with their Z-Wave node number as
their name. Thermostat names do not read into g! at this time.
Decimal Temperature Control: TZEMT400BB32MAA thermostats do not support decimal temperature
set points.