Filter
Top Products
21
RT-PRC016-EN
Performance
Data
Table PD-8 — Belt Drive Evaporator Fan Performance -TSC072AD - Downflow Configuration (SI)
External Static Pressure (Pascals)
25 50 75 100 125 150 175 200 225 250
m
3
/h RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW RPM kW
1.12 Nom kW Standard Motor & Low Static Drive 1.12 Nom kW Standard Motor & Drive
3260 - - - - 573 0.25 630 0.30 680 0.36 726 0.41 769 0.47 811 0.52 851 0.58 889 0.65
3670 - - 548 0.26 602 0.31 656 0.37 706 0.43 751 0.49 792 0.55 832 0.61 871 0.67 908 0.74
4080 - - 584 0.33 635 0.38 682 0.45 732 0.51 777 0.58 818 0.64 856 0.71 893 0.77 930 0.84
4490 569 0.35 621 0.42 670 0.47 715 0.54 758 0.60 802 0.68 845 0.75 883 0.82 919 0.89 953 0.96
4890 612 0.45 660 0.51 706 0.58 749 0.64 789 0.71 830 0.79 870 0.87 909 0.95 945 1.02 979 1.10
External Static Pressure (Pascals)
275 300 325 350 375
CFM RPM kW RPM kW RPM kW RPM kW RPM kW
1.12 Nom kW Std Motor 1.12 Nom kW Standard Motor
& Drive & Hi Static Drive
3260 925 0.71 960 0.77 994 0.83 1026 0.89 1057 0.95
3670 944 0.81 978 0.87 1010 0.94 1043 1.01 1073 1.08
4080 964 0.91 998 0.99 1030 1.06 1063 1.14 1092 1.21
4490 986 1.04 1019 1.11 1051 1.19 1082 1.27 1112 1.35
4890 1011 1.18 1043 1.26 1073 1.34 1103 1.42 1133 1.51
1.50 Nom kW Over-Sized Motor
& Hi Static Drive
Notes:
Data Includes Pressure Drop Due To Wet Coils And Filters.
1.12 kW - Fan Motor Heat (kW) = 1.144 x Fan kW + 0.132
1.50 kW - Fan Motor Heat (kW) = 1.178 x Fan kW + 0.464
1.12 Nom kW Standard Motor
& Hi Static Drive
←←
←←
←
Factory Supplied Motors, In Commercial Equipment, Are
Definite Purpose Motors, Specifically Designed And
Tested To Operate Reliably And Continuously At All
Cataloged Conditions. Using The Full Horsepower Range
Of Our Fan Motors As Shown In Our Tabular Data Will
Not Result In Nuisance Tripping Or Premature Motor
Failure. Our Product’s Warranty Will Not Be Affected.
Table PD-8a — Belt Drive Evaporator Fan Performance -TSC072AD - Downflow Configuration (IP)
External Static Pressure (Inches of Water)
.10 .20 .30 .40 .50 .60 .70 .80 .90 1.00
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
1-1/2 HP Standard Motor
&
Low Static Drive 1-1/2 HP Standard Motor
&
Drive
1920 - - - - 573 0.34 630 0.41 680 0.48 726 0.55 769 0.62 811 0.70 851 0.78 889 0.87
2160 - - 548 0.35 602 0.42 656 0.50 706 0.58 751 0.65 792 0.73 832 0.81 871 0.90 908 0.99
2400 - - 584 0.45 635 0.52 682 0.60 732 0.69 777 0.77 818 0.86 856 0.95 893 1.04 930 1.13
2640 569 0.47 621 0.56 670 0.64 715 0.72 758 0.81 802 0.91 845 1.01 883 1.10 919 1.20 953 1.29
2880 612 0.60 660 0.69 706 0.78 749 0.86 789 0.96 830 1.06 870 1.16 909 1.27 945 1.37 979 1.48
External Static Pressure (Inches of Water)
1.10 1.20 1.30 1.40 1.50
CFM RPM BHP RPM BHP RPM BHP RPM BHP RPM BHP
1-1/2 HP Standard Mtr
& Drive
1920 925 0.95 960 1.03 994 1.11 1026 1.19 1057 1.27
2160 944 1.08 978 1.17 1010 1.26 1043 1.36 1073 1.44
2400 964 1.22 998 1.32 1030 1.42 1063 1.53 1092 1.63
2640 986 1.39 1019 1.49 1051 1.60 1082 1.71 1112 1.81
2880 1011 1.58 1043 1.69 1073 1.79 1103 1.90 1133 2.02
2 HP Over-Sized Mtr & Hi Static Drive
Notes:
Data Includes Pressure Drop Due To Wet Coils And Filters.
1 1/2 HP - Fan Motor Heat (MBH) = 2.915 x Fan BHP + 0.451
2 HP - Fan Motor Heat (MBH) = 3.000 x Fan BHP + 0.500
1-1/2 HP Standard Motor
& Hi Static Drive
←←
←←
←
1-1/2 HP Standard Motor
&
Hi Static Drive
←←
←←
←
Factory Supplied Motors, In Commercial Equipment, Are
Definite Purpose Motors, Specifically Designed And
Tested To Operate Reliably And Continuously At All
Cataloged Conditions. Using The Full Horsepower Range
Of Our Fan Motors As Shown In Our Tabular Data Will
Not Result In Nuisance Tripping Or Premature Motor
Failure. Our Product’s Warranty Will Not Be Affected.