Trane TCONT624AS42DA Thermostat User Manual


 
11
User Guide
About
Clean Screen
About
Setting Range
Version Current rmware version loaded on the control
ZWAVE Ver Current version of the ZWAVE rmware
Node - ID ZWAVE identication for this device
Home - ID ZWAVE identication for the connected ZWAVE network
Out - Type Identies the type of outdoor unit installed
C/O - Type Indicates whether the switchover valve (SOV) is energized in cooling or heating mode
In - Type Identies the type of indoor unit installed
Once all selections have been made, press the Done button to exit and return to Menu. Press Next to navigate to the next setting.
Clean Screen
Setting Range Description
Clean Screen Yes, No Selecting yes allows the user to clean the screen without activating any
of the onscreen touch points. Use only water and a soft cloth, no harmful
chemicals.
Once all selections have been made, press the Done button to exit and return to Menu. Press Next to navigate to the next setting.
b. When the user selects the “Update Firmware” button an “Update Firmware” dialog will appear. The dialog will rst
connect to the device and then it will display the rmware update progress.
c. After the rmware has been downloaded it is then applied to the TCONT624.
d. The portal retrieves version information from the TCONT624.
e. Finally the user is shown that the rmware was updated successfully