Filter
Top Products
5
Solid Blue: The Camera has been connected to a network.
Built-in Microphone: The location where the voice from your partner comes out.
2.3.2 Rear View
Power Jack
LAN Port
WPS LED Indicator
RESET Button
WPS Button
Base Plate
Power Jack: The power connector is where you connect the power adapter.
RESET: Press the button for more than 15 seconds, and the Camera will be restored to factory
defaults.
LAN Port: Through this port, you can connect the Camera to your computer or the other Ethernet
network devices.
WPS (Wi-Fi Protected Setup): This button is used to easily set up a wireless connection with the
Router supporting WPS.
Step 1. Press the WPS button on the router supporting WPS for 2 seconds.
Step 2. Within 2 minutes, press the WPS button on the Camera for 2 seconds.
Lock Ring: It is used to adjust the angle of the Camera.
Base Plate: It is used to support the Camera and can be fixed to a flat surface with the supplied
screws.