35
Maintenance
Remove the water supply filter
●
Remove the filter cover with the wrench.
●
The filter will come out with the filter cover.
Clean the filter
Reinstall the water supply filter
●
Reassemble the water shutoff valve unit and
tighten the filter cover with the wrench
●
Remove the filter and clean the mesh by
running it under water.
✲ Use a small brush, such as a toothbrush to
remove any dirt that is lodged in the mesh.
✲ Remove any dirt that may have deposited inside
the water shutoff valve unit with a cotton swab.
1
Be sure to tighten the water
supply filter securely.
A loose filter may result in
water leakage.
Always perform
the following
Caution!
Open the water shutoff valve
●
Open the water shutoff valve with the wrench.
●
Confirm that there is no water leakage from the
water shutoff valve unit.
!
1
Cleaning the filter
●
Use only plain water to clean the filter. Do not use detergent or cleaning solution.
●
Do not apply force when handling the filter to avoid bending it.
If the filter becomes extremely dirty, we recommend that you replace it with a new one.
