Filter
Top Products
22
When finished, move
away from the toilet
(more than one foot).
After 3 seconds the toilet will
automatically flush
●
When the sensor does not detect motion near the toilet, the motion detection sensor light located on the main unit
control goes out.
●
Light flush only activates when sensor detects someone standing in front of unit for 6 seconds and seat and lid are
both raised.
Flushing the toilet during a power outage
●
Pull out the flush lever located on the side of the toilet bowl.
Pull out the flush lever
To turn off the Auto Flush function
Push the Auto Flush button on
the remote controller to
deactivate the Auto Flush
●
The "FLUSH" will disappear from the remote control
display.
●
To turn the Auto Flush on again, repeat this
operation.
● You must stand in front of the toilet for at
least 6 seconds in order to activate the
automatic flush function.
1.2 Gallon light flush (4.5 LPF)
The toilet bowl is flushed.
1.6 Gallons per Flush (6 LPF)
When standing in front of
the toilet