Filter
Top Products
– 129 –
No.
11
Part name
PMV coil
Procedure
1. Detachment
1) Carry out work of item 1 of
Q
.
2) Turn the coil while pulling upward and then
remove the coil from the PMV main unit.
2. Attachment
1) Surely match the positioning projection of
the coil with the concave part of PMV main
unit and then fix it.
Remarks
12
Fan guard 1. Detachment
1) Carry out works of item 1 of
Q
and 1 of
R
.
REQUIREMENT
To prevent scratch on the product, carry out
the work on cardboard, cloth, etc.
2) Remove the discharge port cabinet and then
put on it so that the fan guard side directs
downward.
3) Remove the hooking claws (8 positions) of
the fan guard.
2. Attachment
1) Push the hooking claws (8 positions) with
hands from the front side to fix the claws.
REQUIREMENT
Check that all the hooking claws are fixed at
the specified positions.
Hooking claw
Concave part PMV main unit
Positioning projection PMV coil
Fan guard Bell mouth Discharge
port cabinet