Filter
Top Products
– 187 –
Sound
in
s
ulation
b
oar
d
Partition plate
assembl
y
M
o
t
o
r
b
a
se
assembl
y
Valve fixin
g
plat
e
Heat exchan
g
e
r
Compresso
r
No.
1-5
1-6
1-7
Photo / Explanatory diagram
Procedure
Remove the motor base assembly, partition plate
assembly and the sound insulation board.
Related parts / Screws list
Part name
Motor base assembly
(Including motor and fan)
Partition plate assembly
(Including reactor)
Used screw
Screw type Quantity
Ø4 × 82
Ø4 × 83
Remove the fixing screws of the heat exchanger and the
valve fixing plate. Remove the compressor fixing bolt.
Related parts / Screws list
Part name
Heat exchanger
Valve fixing plate
Compressor
Used screw
Screw type Quantity
Ø4 × 81
Ø4 × 81
bolt 3
As shown in the left figure, remove the set of refrigera-
tion cycle assembly from the outdoor unit base plate.
* In this time, work attentively so that the cycle pipes are
not damaged by dent or deformation. Apply protective
measures to pipes if necessary.