Filter
Top Products
– 142 –
Side cabinet
Inverter
Fin guard
End plate of the
heat exchanger
Discharge port
Valve support plate
Side cabinet
Inverter
Side cabinet
Cabling panel
(Rear)
Valve support
plate
No.
Part name
Discharge port
cabinet
Side cabinet
Procedure
1. Detachment
1) Perform work of item 1 of .
2) Take off screws (ST1T Ø4 × 10L, 3 pcs.)
of discharge port cabinet for the partition
plate.
3) Take off screws (ST1T Ø4 × 10L, 2 pcs.)
of discharge port cabinet for the bottom
plate.
4) Take off screw (ST1T Ø4 × 10L, 1 pc.) of
discharge port cabinet for the heat
exchanger.
5) Take off screws (ST1T Ø4 × 10L, 2 pcs.)
of discharge port cabinet for the fin guard.
2. Attachment
1) Put the upper left side of the discharge
port cabinet on the end plate of the heat
exchanger, and then fix it with screw.
(ST1T Ø4 × 10L, 1 pc.)
2) Attach the removed screws to the original
positions.
1) Perform work of item 1 of .
2) Remove screw fixing the inverter and the
side cabinet. (ST1T Ø4 × 10, 1 pc.)
3) Remove screws of the side cabinet and
the valve support plate.
(ST1T Ø4 × 10, 2 pcs.)
4) Remove screw of the side cabinet and the
cabling panel (Rear).
(ST1T Ø4 × 10, 1 pc.)
5) Remove screw of the side cabinet and the
bottom plate. (ST1T Ø4 × 10, 1 pc.)
6) Remove screw of the side cabinet and the
fin guard (Heat exchanger).
(ST1T Ø4 × 10, 2 pcs.)
Remarks