Filter
Top Products
2 screws
Screw
Screw
Screw
Screw
Screw
Screw
No.
Part name
Evaporator
(Heat exchanger)
Procedures
1) Follow to the procedure in the item
.
2) Remove the pipe holder from the rear
side of the main unit.
3) Remove 2 fixing screws at the left side
of the end plate of the heat exchanger.
Remarks
4) Remove 2 fixing screws on the heat
exchager fixing holder to separate the
heat exchanger from the back body.
FILE NO. SVM-12004
– 91 –