Filter
Top Products
8
EN
When you set the air conditioner to AUTO mode, it automatically selects cooling, heating, or fan only operation depending on the room
temperature. () see page 16.)
The fan speed and louver are also automatically controlled.
Start
a button
Press this button to start the air conditioner.
b AUTO button (AUTO)
Press AUTO button.
• The OPERATION indicator (green or orange) on the display panel of the indoor unit
lights. The operating mode is selected according to the room temperature and
operation starts after approximately 3 minutes.
• If the AUTO mode is uncomfortable, you can select the desired conditions manually.
The temperature, fan speed and louver position can be changed, and MODE is also
changed from AUTO to A when the fan speed or louver position is changed.
The fan speed indicator is also shown.
Stop
button
Press this button again to stop the air conditioner.
When you set the air conditioner to A mode or switch over from AUTO operation because of a change in settings, the air conditioner
automatically selects cooling, heating, or fan only operation depending on the room temperature. () see page 16.)
Start
a button
Press this button to start the air conditioner.
b Mode select button (MODE)
Select A.
c Temperature button ( )
Set the desired temperature.
• The OPERATION indicator (green or orange) on the display panel of the indoor unit
lights. The operating mode is selected according to the room temperature and operation
starts after approximately 3 minutes.
• The temperature, fan speed and louver position can be changed. You can select the
desired conditions manually.
Stop
button
Press this button again to stop the air conditioner.
AUTOMATIC OPERATION
AUTOMATIC OPERATION (AUTO CHANGEOVER)
AUTO
PRESET
CLOCK
CHECK
FILTER
RESET
CLR
SET
SWING
FIX
FAN
ON
OFF
a
b
PAP
MODE
HiPOWER
ECO
MEMO
SLEEP
TEMP
1
.
3
.
5
.
9H
AUTO
PRESET
CLOCK
CHECK
FILTER
RESET
CLR
SET
SWING
FIX
FAN
ON
OFF
a
b
c
PAP
MODE
HiPOWER
ECO
MEMO
SLEEP
TEMP
1
.
3
.
5
.
9H
TEMP
01_EU_RAS-10JKP_EN.fm Page 8 Wednesday, April 9, 2003 8:08 AM