Filter
Top Products
Appendix-5
Appendix
No. Photo / Explanatory diagram Procedure
Remove the motor base assembly, partition plate assembly
and the sound insulation board.
Related parts / Screws list
Used screw
Part name
Screw type Quantity
Motor base assembly
(Including motor and fan)
Ø4 × 82
Partition plate assembly
(Including reactor)
Ø4 × 83
1-5
Remove the fixing screws of the heat exchanger and the
valve fixing plate. Remove the compressor fixing bolt.
Related parts / Screws list
Used screw
Part name
Screw type Quantity
Heat exchanger Ø4 × 81
Valve fixing plate Ø4 × 81
Compressor bolt 3
1-6
As shown in the left figure, remove the set of refrigeration cycle
assembly from the outdoor unit base plate.
* In this time, work attentively so that the cycle pipes are not
damaged by dent or deformation. Apply protective
measures to pipes if necessary.
1-7
S
ound
in
su
l
a
tion
b
o
a
r
d
Partition plate
assembl
y
M
o
t
o
r
base
assembl
y
Valve fixin
g
plat
e
Heat exchan
g
e
r
Compresso
r