Filter
Top Products
– 102 –
No.
Part name
Front cabinet
Procedure
1. Detachment
1) Perform step 1 in
.
2) Remove the fixing screws (screw 2 pcs.)
used to secure the front cabinet and
inverter cover, the screws (screw 3 pcs.)
used to secure the front cabinet at the
bottom, the screw used to secure the
front and side cabinet (Right), and the
Remarks
FILE NO. SVM-10019
2. Attachment
1) Insert the claw on the front left side into
the side cabinet (left).
2) Hook the bottom part of the front right
side onto the concave section of the
bottom plate. Insert the claw of the side
cabinet (right) into the square hole in the
front cabinet.
3) Return the screws that were removed
above to their original positions and
attach them.
screws (screw 2 pcs.) used to secure
the motor base.
• The front cabinet is fitted into the side
cabinet (left) at the front left side so
pull up the top of the front cabinet to
remove it.