Filter
Top Products
– 56 –
10-2. Optional Parts, Accessories and Tools
10-2-1. Optional Installation Parts
Attachment bolt arrangement of outdoor unit
• Secure the outdoor unit with the attachment bolts and
nuts if the unit is likely to be exposed to a strong wind.
• Use Ø8 mm or Ø10 mm anchor bolts and nuts.
If it is necessary to drain the defrost water, attach drain
nipple to the base plate of the outdoor unit before
installing it.
10-2-2. Accessory and Installation Parts
Suction side
Diffuser
Elongated
drain hole
(
)
Drain hole
(
)
This model is not equipped with
an extension drain hose.
Option:
For the extension drain hose, use the optionally available RB-821SW or a
commercially available one.
• Indoor units connectable with a multi-system outdoor unit
(Other indoor units are unavailable.)
RAS-B10SKVP-E, RAS-B13SKVP-E, RAS-B16SKVP-E
• When using a multi-system outdoor unit, refer to the installation
manual provided with the model concerned.
Part Code
Y
Z
Parts name
Refrigerant piping
Indoor unit name Liquid side (Outer diameter) Gas side (Outer diameter)
RAS-B10SKVP-E, B13SKVP-E
6.35 mm 9.52 mm
RAS-10SKVP-ND, 13SKVP-ND
RAS-B16SKVP-E, 16SKVP-ND 6.35 mm 12.7 mm
Shield pipe (for extension drain hose) (polyethylene foam, 6 mm thick)
Q’ty
.
1 ea.
1
<Others>
Name
Owner’s manual
Installation manual
Important information
and warning*
B/W strips*
(Energy efficiency labels)
Parts marked with asterisk (*) are
packaged with the outdoor unit.
Part name (Q’ty)
Installation plate × 1
Wireless remote controller × 1
Battery × 2
Part No.
Part name (Q’ty)
Remote controller holder × 1
Plasma pure filter × 1
Mounting screw Ø4 × 25L × 6
Part No.
Part name (Q’ty)
Remote controller
holder mounting screw
Ø3.1 × 16L × 2
Drain nipple* × 1
Water-proof rubber cap* × 2
Part No.