Filter
Top Products
– 53 –
AUTO
3
95
76
1
2
8
4
10
9-5-2. Name and Functions of Indications on Remote Controller
[Display]
All indications, except for the clock time indicator, are displayed by pushing the button.
1 Transmission mark
This transmission mark indicates when the remote
controller transmits signals to the indoor unit.
2 Mode indicator
Indicates the current operation mode.
(AUTO : Automatic control, A : Auto changeover
control,
: Cool, : Dry, : Heat)
3 Temperature indicator
Indicates the temperature setting.
(17°C to 30°C)
4 PURE indicator
Shows that the electrical air purifying operation is in
progress.
5 FAN speed indicator
Indicates the selected fan speed.
AUTO or five fan speed levels
(LOW
, LOW
+
, MED , MED
+
,
HIGH
) can be shown.
Indicates AUTO when the operating mode is either
AUTO or
: Dry.
6 TIMER and clock time indicator
The time setting for timer operation or the clock time
is indicated.
The current time is always indicated except during
TIMER operation.
7 Hi POWER indicator
Indicates when the Hi POWER operation starts.
Push the Hi POWER button to start and push it
again to stop the operation.
8 (MEMORY) indicator
Flashes for 3 seconds when the MEMO button is
pushed during operation.
The
mark is shown when holding down the
button for 3 seconds or more while the mark is
flashing.
Push another button to turn off the mark.
9 SLEEP MODE indicator
Indicates when the SLEEP MODE is in activated.
Push the SLEEP MODE button to start and push it
again to stop operation.
10 A, B change indicator remote controller
When the remote controller switching function is
set, “B” appears in the remote controller display.
(When the remote controller setting is “A”, there is
no indication at this position.)
• In the illustration, all indications are shown for
purposes of explanation.
During operation, only the relevant indicators are
shown on the remote controller.