Filter
Top Products
THREADING THE MACHINE
x Place spool of thread onto spool pin.
x Press spool holder ring against spool.
CAUTION: Spool of thread should be ro-
tated freely after pressing the holder ring
on.
x Pull thread to Guidepost (1) and draw it
to left, under pretension stud (2).
x Draw thread between two tension discs
and then pull to right as shown.
x Follow arrows, guide thread into take-up
lever eyelet (3) and then backwards to
wire loop (4).
x Top view of threading.
x Slip thread through (5).
x Insert needle threader through needle
eye and pull thread through needle eye.
x Pull thread 2-3 inches to the front.
8