Filter
Top Products
TURNING A SQUARE CORNER
CHANGING NEEDLES
HOW TO REPLACE THE SLIDE PLATE
x Make sure dove tail side is facing up and
align slide plate to grooves.
x Loosen needle clamp screw with a screw-
driver
x With flat shank face to the left side, insert
a new needle up into clamp as far as it
will go.
x Tighten needle clamp screw securely.
x Upon reaching the desired position, stop
stitching with the needle tip still in the
fabric.
x Move presser foot lift lever up.
x Turn fabric.
x Move presser foot lift lever down.
x Continue stitching the seam.
14