Filter
Top Products
Owner’s Manual — Phoenix 300
Installation, Operation and Service Instructions
1
www.thermastor.com • sales@thermastor.comToll-Free 1-800-533-7533
Read and Save These Instructions
Phoenix 300 High Capacity Dehumidifier
Part number TS-218
The Phoenix 300 Dehumidifier is designed to maximize the water removal capacity from a single 110V, 15 amp circuit.
The multiple ducting options on the Phoenix 300 allows for ducting both the intake air and the filtered and
dehumidified supply air. This makes it possible to easily combine the Phoenix 300 with a HEPA air scrubber, air
conditioner or desiccant dehumidifier.
Phoenix dehumidifiers feature significant air filtration. Even the standard 57% MERV-8 filters remove over 90% of
seven-micron particles (the size of a human red blood cell). This filtration dramatically improves the air quality in the
areas being dried and assures continued optimal performance of the refrigeration system.
The Phoenix 300
High Capacity Dehumidifier
High capacity – Up to 38 gallons per day
High energy efficiency – Plugs into a grounded 115V
outlet
Pleated media filter – Built-in air filter reduces dust
and mold
Twist-on duct collar – Direct the drying power where
you need it
Optional high-efficiency filter – Removes 95% of
one-micron particles
Reservoir pump system – Strong and dependable,
20 ft of lift
Pump purge switch – Drains reservoir, no spills or
drips
Pump fail warning light and cut-off – Prevents reservoir
overflow
Lighted power switch – Check machine status at a
glance
Digital hour meter – Easy-to-read for more accurate
billing
30-ft power cord – No need for extension cords
30-ft drain hose – Pump condensate to sinks or drains
Phoenix 300
PN 4022599
Specifications subject to change without notice.
Revised 1/07
PO Box 8680 • Madison, WI 53708